This is the latest recevied telemetry packets stored in our database for station/object TF3AO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742152965 | 437 | 35 | 0 | 0 | 0 |
| 1742152065 | 421 | 36 | 0 | 0 | 0 |
| 1742151165 | 425 | 35 | 0 | 0 | 0 |
| 1742150265 | 432 | 35 | 0 | 0 | 0 |
| 1742149364 | 435 | 36 | 0 | 0 | 0 |
| 1742148464 | 437 | 34 | 0 | 0 | 0 |
| 1742147564 | 425 | 35 | 0 | 0 | 0 |
| 1742146664 | 423 | 36 | 0 | 0 | 0 |
| 1742145764 | 439 | 37 | 0 | 0 | 0 |
| 1742144864 | 425 | 34 | 0 | 0 | 0 |
| 1742143964 | 434 | 34 | 0 | 0 | 0 |
| 1742143064 | 435 | 35 | 0 | 0 | 0 |
| 1742142163 | 436 | 35 | 0 | 0 | 0 |
| 1742141263 | 428 | 36 | 0 | 0 | 0 |
| 1742140363 | 420 | 35 | 0 | 0 | 0 |
| 1742139463 | 432 | 36 | 0 | 0 | 0 |
| 1742138565 | 435 | 37 | 0 | 0 | 0 |
| 1742137663 | 420 | 35 | 0 | 0 | 0 |
| 1742136763 | 427 | 36 | 0 | 0 | 0 |
| 1742135863 | 435 | 36 | 0 | 0 | 0 |
| 1742134962 | 430 | 35 | 0 | 0 | 0 |
| 1742134062 | 424 | 34 | 0 | 0 | 0 |
| 1742133162 | 428 | 36 | 0 | 0 | 0 |
| 1742132262 | 435 | 35 | 0 | 0 | 0 |
| 1742131362 | 436 | 36 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)