This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773413046 | 253 Count | 417 Count | 183 Count | 0 VDC | 0 VDC |
| 1773409447 | 250 Count | 411 Count | 181 Count | 0 VDC | 0 VDC |
| 1773405844 | 247 Count | 405 Count | 179 Count | 0 VDC | 0 VDC |
| 1773402243 | 244 Count | 399 Count | 177 Count | 0 VDC | 0 VDC |
| 1773398642 | 236 Count | 386 Count | 170 Count | 0 VDC | 0 VDC |
| 1773395041 | 233 Count | 380 Count | 168 Count | 0 VDC | 0 VDC |
| 1773391440 | 226 Count | 370 Count | 162 Count | 0 VDC | 0 VDC |
| 1773387839 | 223 Count | 364 Count | 160 Count | 0 VDC | 0 VDC |
| 1773384238 | 219 Count | 357 Count | 157 Count | 0 VDC | 0 VDC |
| 1773380637 | 216 Count | 352 Count | 155 Count | 0 VDC | 0 VDC |
| 1773377035 | 212 Count | 347 Count | 152 Count | 0 VDC | 0 VDC |
| 1773373435 | 209 Count | 343 Count | 150 Count | 0 VDC | 0 VDC |
| 1773369834 | 205 Count | 337 Count | 147 Count | 0 VDC | 0 VDC |
| 1773366233 | 202 Count | 332 Count | 145 Count | 0 VDC | 0 VDC |
| 1773362632 | 198 Count | 326 Count | 142 Count | 0 VDC | 0 VDC |
| 1773359031 | 195 Count | 321 Count | 140 Count | 0 VDC | 0 VDC |
| 1773355430 | 192 Count | 319 Count | 138 Count | 0 VDC | 0 VDC |
| 1773351829 | 189 Count | 315 Count | 136 Count | 0 VDC | 0 VDC |
| 1773348228 | 185 Count | 309 Count | 133 Count | 0 VDC | 0 VDC |
| 1773344626 | 182 Count | 304 Count | 131 Count | 0 VDC | 0 VDC |
| 1773341025 | 178 Count | 297 Count | 128 Count | 0 VDC | 0 VDC |
| 1773337425 | 175 Count | 291 Count | 126 Count | 0 VDC | 0 VDC |
| 1773333823 | 171 Count | 284 Count | 123 Count | 0 VDC | 0 VDC |
| 1773330222 | 168 Count | 278 Count | 121 Count | 0 VDC | 0 VDC |
| 1773326621 | 164 Count | 271 Count | 118 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)