This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777377610 | 0 Count | 3 Count | 0 Count | 4.15 VDC | 5.1 VDC |
| 1777375810 | 205 Count | 995 Count | 0 Count | 4.15 VDC | 5.1 VDC |
| 1777374013 | 203 Count | 986 Count | 0 Count | 4.15 VDC | 5.1 VDC |
| 1777372213 | 201 Count | 978 Count | 0 Count | 4.16 VDC | 5.1 VDC |
| 1777372202 | 196 Count | 978 Count | 0 Count | 4.16 VDC | 5.1 VDC |
| 1777370402 | 194 Count | 964 Count | 0 Count | 4.16 VDC | 5.1 VDC |
| 1777368603 | 192 Count | 951 Count | 0 Count | 4.16 VDC | 5.08 VDC |
| 1777366803 | 190 Count | 940 Count | 0 Count | 4.17 VDC | 5.1 VDC |
| 1777365005 | 188 Count | 931 Count | 0 Count | 4.17 VDC | 5.12 VDC |
| 1777363206 | 186 Count | 922 Count | 0 Count | 4.2 VDC | 5.1 VDC |
| 1777361407 | 184 Count | 915 Count | 0 Count | 4.19 VDC | 5.08 VDC |
| 1777359603 | 182 Count | 906 Count | 0 Count | 4.09 VDC | 5.08 VDC |
| 1777357804 | 180 Count | 871 Count | 0 Count | 4.09 VDC | 4.36 VDC |
| 1777356003 | 178 Count | 862 Count | 0 Count | 4.09 VDC | 4.36 VDC |
| 1777354204 | 176 Count | 853 Count | 0 Count | 4.09 VDC | 4.36 VDC |
| 1777352404 | 174 Count | 844 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1777350594 | 167 Count | 836 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1777348795 | 165 Count | 822 Count | 0 Count | 4.08 VDC | 4.36 VDC |
| 1777346995 | 163 Count | 812 Count | 0 Count | 4.07 VDC | 4.36 VDC |
| 1777345195 | 161 Count | 803 Count | 0 Count | 4.08 VDC | 1.1 VDC |
| 1777343394 | 159 Count | 793 Count | 0 Count | 4.07 VDC | 1 VDC |
| 1777341595 | 157 Count | 784 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1777339797 | 155 Count | 769 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1777337997 | 153 Count | 760 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1777336198 | 151 Count | 751 Count | 0 Count | 4.08 VDC | 1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)