This is the latest recevied telemetry packets stored in our database for station/object F6DAY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788976131 | 590 Count | 738 Count | 364 Count | 0 VDC | 0 VDC |
| 1788975167 | 587 Count | 735 Count | 362 Count | 0 VDC | 0 VDC |
| 1788974203 | 584 Count | 732 Count | 360 Count | 0 VDC | 0 VDC |
| 1788973239 | 582 Count | 730 Count | 359 Count | 0 VDC | 0 VDC |
| 1788972275 | 580 Count | 728 Count | 358 Count | 0 VDC | 0 VDC |
| 1788971311 | 577 Count | 725 Count | 356 Count | 0 VDC | 0 VDC |
| 1788970347 | 575 Count | 723 Count | 355 Count | 0 VDC | 0 VDC |
| 1788969383 | 572 Count | 720 Count | 353 Count | 0 VDC | 0 VDC |
| 1788968419 | 570 Count | 718 Count | 352 Count | 0 VDC | 0 VDC |
| 1788967455 | 567 Count | 716 Count | 350 Count | 0 VDC | 0 VDC |
| 1788966491 | 565 Count | 714 Count | 349 Count | 0 VDC | 0 VDC |
| 1788965526 | 563 Count | 712 Count | 348 Count | 0 VDC | 0 VDC |
| 1788964562 | 561 Count | 710 Count | 347 Count | 0 VDC | 0 VDC |
| 1788963598 | 559 Count | 708 Count | 346 Count | 0 VDC | 0 VDC |
| 1788962634 | 556 Count | 705 Count | 344 Count | 0 VDC | 0 VDC |
| 1788961670 | 554 Count | 703 Count | 343 Count | 0 VDC | 0 VDC |
| 1788960706 | 550 Count | 699 Count | 340 Count | 0 VDC | 0 VDC |
| 1788959742 | 548 Count | 697 Count | 339 Count | 0 VDC | 0 VDC |
| 1788958778 | 545 Count | 694 Count | 337 Count | 0 VDC | 0 VDC |
| 1788957814 | 543 Count | 693 Count | 336 Count | 0 VDC | 0 VDC |
| 1788956850 | 541 Count | 691 Count | 335 Count | 0 VDC | 0 VDC |
| 1788955886 | 540 Count | 690 Count | 335 Count | 0 VDC | 0 VDC |
| 1788955495 | 538 Count | 688 Count | 334 Count | 0 VDC | 0 VDC |
| 1788954531 | 537 Count | 687 Count | 334 Count | 0 VDC | 0 VDC |
| 1788953567 | 535 Count | 686 Count | 333 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)