This is the latest recevied telemetry packets stored in our database for station/object W6SRR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1769990809 | 1356 | 77.9 | 35.4 | 72.2 | 0 |
| 1769989907 | 1353 | 77.8 | 34.9 | 72 | 0 |
| 1769989012 | 1356 | 77.7 | 34.9 | 71.9 | 0 |
| 1769988109 | 1356 | 77.4 | 34.9 | 71.7 | 0 |
| 1769987210 | 1356 | 77.3 | 34.3 | 71.6 | 0 |
| 1769986308 | 1351 | 77.1 | 34.3 | 71.4 | 0 |
| 1769985410 | 1369 | 76.9 | 34.3 | 71.3 | 0 |
| 1769984509 | 1356 | 76.7 | 34.9 | 71 | 0 |
| 1769983609 | 1356 | 76.6 | 34.9 | 70.8 | 0 |
| 1769982707 | 1354 | 76.3 | 34.3 | 70.6 | 0 |
| 1769981809 | 1354 | 76.1 | 34.3 | 70.4 | 0 |
| 1769980908 | 1356 | 75.9 | 34.3 | 70.1 | 0 |
| 1769980009 | 1354 | 75.8 | 34.3 | 70 | 0 |
| 1769979107 | 1354 | 75.9 | 34.3 | 70 | 0 |
| 1769978210 | 1354 | 76 | 34.3 | 70 | 0 |
| 1769977309 | 1354 | 76.4 | 34.3 | 70.2 | 0 |
| 1769976410 | 1356 | 77.8 | 35.4 | 71.4 | 0 |
| 1769975508 | 1344 | 77.3 | 34.3 | 71.4 | 0 |
| 1769974609 | 1342 | 75.4 | 34.3 | 69.8 | 0 |
| 1769973708 | 1354 | 73.7 | 33.2 | 68.1 | 0 |
| 1769972810 | 1353 | 73.7 | 32.7 | 67.9 | 0 |
| 1769971907 | 1354 | 73.5 | 32.2 | 67.8 | 0 |
| 1769971009 | 1356 | 73.2 | 32.2 | 67.6 | 0 |
| 1769970109 | 1356 | 73 | 32.2 | 67.3 | 0 |
| 1769969210 | 1353 | 72.8 | 32.2 | 67.2 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)