This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766002003 | 141 Count | 634 Count | 73 Count | 4.05 VDC | 0 VDC |
| 1766001104 | 139 Count | 623 Count | 72 Count | 4.05 VDC | 0 VDC |
| 1766000203 | 137 Count | 617 Count | 71 Count | 4.05 VDC | 0 VDC |
| 1765999303 | 134 Count | 609 Count | 69 Count | 4.05 VDC | 0 VDC |
| 1765998403 | 132 Count | 600 Count | 68 Count | 4.05 VDC | 0 VDC |
| 1765997504 | 130 Count | 592 Count | 67 Count | 4.05 VDC | 0 VDC |
| 1765996603 | 127 Count | 578 Count | 65 Count | 4.05 VDC | 0 VDC |
| 1765995705 | 126 Count | 572 Count | 65 Count | 4.05 VDC | 0 VDC |
| 1765994804 | 123 Count | 561 Count | 63 Count | 4.05 VDC | 0 VDC |
| 1765993903 | 122 Count | 554 Count | 63 Count | 4.05 VDC | 0 VDC |
| 1765993003 | 119 Count | 545 Count | 61 Count | 4.05 VDC | 0 VDC |
| 1765992101 | 117 Count | 538 Count | 60 Count | 4.05 VDC | 0 VDC |
| 1765991202 | 115 Count | 530 Count | 59 Count | 4.05 VDC | 0 VDC |
| 1765990303 | 113 Count | 526 Count | 58 Count | 4.05 VDC | 0 VDC |
| 1765989403 | 111 Count | 514 Count | 57 Count | 4.05 VDC | 0 VDC |
| 1765988504 | 109 Count | 508 Count | 56 Count | 4.05 VDC | 0 VDC |
| 1765987604 | 106 Count | 495 Count | 54 Count | 4.05 VDC | 0 VDC |
| 1765986702 | 105 Count | 487 Count | 54 Count | 4.05 VDC | 0 VDC |
| 1765985802 | 102 Count | 476 Count | 52 Count | 4.05 VDC | 0 VDC |
| 1765984905 | 101 Count | 466 Count | 52 Count | 4.06 VDC | 0 VDC |
| 1765984005 | 98 Count | 450 Count | 50 Count | 4.06 VDC | 0 VDC |
| 1765982204 | 89 Count | 406 Count | 47 Count | 4.06 VDC | 0.32 VDC |
| 1765981303 | 87 Count | 399 Count | 46 Count | 4.06 VDC | 1.08 VDC |
| 1765980401 | 85 Count | 389 Count | 45 Count | 4.06 VDC | 2.74 VDC |
| 1765979502 | 83 Count | 382 Count | 44 Count | 4.06 VDC | 4.26 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)