This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773434970 | 237 Count | 446 Count | 218 Count | 4.42 VDC | 0 VDC |
| 1773433169 | 218 Count | 412 Count | 200 Count | 4.39 VDC | 0 VDC |
| 1773431369 | 204 Count | 386 Count | 187 Count | 4.39 VDC | 0 VDC |
| 1773429568 | 190 Count | 356 Count | 174 Count | 4.41 VDC | 0 VDC |
| 1773427767 | 172 Count | 327 Count | 157 Count | 4.38 VDC | 0 VDC |
| 1773425967 | 153 Count | 290 Count | 141 Count | 4.42 VDC | 0 VDC |
| 1773424166 | 127 Count | 250 Count | 116 Count | 4.4 VDC | 0 VDC |
| 1773422365 | 109 Count | 213 Count | 99 Count | 4.39 VDC | 0 VDC |
| 1773420565 | 77 Count | 157 Count | 70 Count | 4.41 VDC | 0 VDC |
| 1773418764 | 60 Count | 123 Count | 54 Count | 4.43 VDC | 0 VDC |
| 1773416963 | 42 Count | 87 Count | 37 Count | 4.39 VDC | 0 VDC |
| 1773415148 | 21 Count | 47 Count | 21 Count | 4.39 VDC | 0 VDC |
| 1773413347 | 613 Count | 1013 Count | 576 Count | 4.38 VDC | 0 VDC |
| 1773411546 | 585 Count | 966 Count | 549 Count | 4.38 VDC | 0 VDC |
| 1773409746 | 566 Count | 934 Count | 531 Count | 4.41 VDC | 0 VDC |
| 1773407945 | 552 Count | 905 Count | 518 Count | 4.41 VDC | 0 VDC |
| 1773406144 | 530 Count | 870 Count | 497 Count | 4.39 VDC | 0 VDC |
| 1773404344 | 513 Count | 840 Count | 481 Count | 4.4 VDC | 0 VDC |
| 1773402543 | 496 Count | 810 Count | 465 Count | 4.38 VDC | 0 VDC |
| 1773400742 | 480 Count | 781 Count | 450 Count | 4.4 VDC | 0 VDC |
| 1773398942 | 464 Count | 751 Count | 435 Count | 4.42 VDC | 0 VDC |
| 1773397141 | 443 Count | 717 Count | 415 Count | 4.43 VDC | 0 VDC |
| 1773395340 | 427 Count | 691 Count | 400 Count | 4.42 VDC | 0 VDC |
| 1773393499 | 409 Count | 667 Count | 387 Count | 4.38 VDC | 0 VDC |
| 1773391698 | 383 Count | 628 Count | 362 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)