This is the latest recevied telemetry packets stored in our database for station/object PD1NL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773443694 | 994 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773441891 | 993 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773440088 | 992 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773438285 | 991 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773436482 | 990 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773434679 | 989 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773432876 | 988 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773431073 | 987 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773429270 | 986 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773427467 | 985 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773425663 | 984 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773423860 | 983 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1773422094 | 982 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773420290 | 981 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773418487 | 980 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773416684 | 979 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773414881 | 978 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773413078 | 977 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773411275 | 976 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773409472 | 975 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773407669 | 974 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773405869 | 973 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773404066 | 972 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773402263 | 971 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1773400496 | 970 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)