This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773440113 | 841 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773438312 | 840 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773436511 | 839 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773434710 | 838 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773432909 | 837 Count | 778 Count | 773 Count | 4.01 VDC | 0 VDC |
| 1773431109 | 836 Count | 778 Count | 773 Count | 4.01 VDC | 0 VDC |
| 1773429308 | 835 Count | 778 Count | 773 Count | 4.01 VDC | 0 VDC |
| 1773427507 | 834 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773425706 | 833 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773423905 | 832 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773422104 | 831 Count | 778 Count | 773 Count | 4.01 VDC | 0 VDC |
| 1773420313 | 830 Count | 778 Count | 773 Count | 4 VDC | 0 VDC |
| 1773418512 | 811 Count | 759 Count | 755 Count | 4 VDC | 0 VDC |
| 1773416711 | 794 Count | 742 Count | 739 Count | 4 VDC | 0 VDC |
| 1773414910 | 780 Count | 729 Count | 726 Count | 4 VDC | 0 VDC |
| 1773413109 | 767 Count | 717 Count | 714 Count | 4 VDC | 0 VDC |
| 1773411308 | 754 Count | 704 Count | 702 Count | 4 VDC | 0 VDC |
| 1773409508 | 740 Count | 691 Count | 689 Count | 4 VDC | 0 VDC |
| 1773407707 | 708 Count | 660 Count | 658 Count | 4 VDC | 0 VDC |
| 1773405906 | 692 Count | 645 Count | 643 Count | 4 VDC | 0 VDC |
| 1773404105 | 680 Count | 634 Count | 632 Count | 4 VDC | 0 VDC |
| 1773402304 | 669 Count | 624 Count | 622 Count | 4.01 VDC | 0 VDC |
| 1773400503 | 653 Count | 609 Count | 607 Count | 4 VDC | 0 VDC |
| 1773398713 | 634 Count | 591 Count | 589 Count | 4 VDC | 0 VDC |
| 1773396912 | 620 Count | 578 Count | 576 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)