This is the latest recevied telemetry packets stored in our database for station/object SQ9PQL-00. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792842382 | 937 Count | 549 Count | 483 Count | 0 VDC | 0 VDC |
| 1792841478 | 935 Count | 548 Count | 482 Count | 0 VDC | 0 VDC |
| 1792840574 | 933 Count | 547 Count | 481 Count | 0 VDC | 0 VDC |
| 1792839671 | 931 Count | 546 Count | 480 Count | 0 VDC | 0 VDC |
| 1792838767 | 929 Count | 545 Count | 479 Count | 0 VDC | 0 VDC |
| 1792837863 | 927 Count | 544 Count | 478 Count | 0 VDC | 0 VDC |
| 1792836959 | 925 Count | 543 Count | 477 Count | 0 VDC | 0 VDC |
| 1792836056 | 923 Count | 542 Count | 476 Count | 0 VDC | 0 VDC |
| 1792835152 | 921 Count | 541 Count | 475 Count | 0 VDC | 0 VDC |
| 1792834248 | 919 Count | 540 Count | 474 Count | 0 VDC | 0 VDC |
| 1792833344 | 917 Count | 539 Count | 473 Count | 0 VDC | 0 VDC |
| 1792832440 | 915 Count | 538 Count | 472 Count | 0 VDC | 0 VDC |
| 1792831537 | 913 Count | 537 Count | 471 Count | 0 VDC | 0 VDC |
| 1792830633 | 911 Count | 536 Count | 470 Count | 0 VDC | 0 VDC |
| 1792829729 | 909 Count | 535 Count | 469 Count | 0 VDC | 0 VDC |
| 1792828825 | 907 Count | 534 Count | 468 Count | 0 VDC | 0 VDC |
| 1792827922 | 905 Count | 533 Count | 467 Count | 0 VDC | 0 VDC |
| 1792827018 | 903 Count | 532 Count | 466 Count | 0 VDC | 0 VDC |
| 1792826114 | 901 Count | 531 Count | 465 Count | 0 VDC | 0 VDC |
| 1792825210 | 899 Count | 530 Count | 464 Count | 0 VDC | 0 VDC |
| 1792824306 | 897 Count | 529 Count | 463 Count | 0 VDC | 0 VDC |
| 1792823402 | 895 Count | 528 Count | 462 Count | 0 VDC | 0 VDC |
| 1792822499 | 893 Count | 527 Count | 461 Count | 0 VDC | 0 VDC |
| 1792821595 | 883 Count | 513 Count | 452 Count | 0 VDC | 0 VDC |
| 1792821589 | 882 Count | 513 Count | 452 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)