This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785381235 | 404 Count | 755 Count | 372 Count | 4.11 VDC | 0 VDC |
| 1785379435 | 392 Count | 733 Count | 361 Count | 4.11 VDC | 0 VDC |
| 1785377634 | 380 Count | 710 Count | 350 Count | 4.11 VDC | 0 VDC |
| 1785375833 | 368 Count | 688 Count | 339 Count | 4.11 VDC | 0 VDC |
| 1785374033 | 354 Count | 662 Count | 326 Count | 4.11 VDC | 0 VDC |
| 1785372232 | 343 Count | 641 Count | 316 Count | 4.11 VDC | 0 VDC |
| 1785370432 | 332 Count | 620 Count | 306 Count | 4.11 VDC | 0 VDC |
| 1785368631 | 321 Count | 599 Count | 296 Count | 4.11 VDC | 0 VDC |
| 1785366830 | 309 Count | 577 Count | 285 Count | 4.11 VDC | 0 VDC |
| 1785365029 | 296 Count | 553 Count | 273 Count | 4.11 VDC | 0 VDC |
| 1785363228 | 285 Count | 533 Count | 263 Count | 4.11 VDC | 0 VDC |
| 1785361428 | 273 Count | 512 Count | 252 Count | 4.11 VDC | 0 VDC |
| 1785359627 | 261 Count | 491 Count | 241 Count | 4.11 VDC | 0 VDC |
| 1785357826 | 249 Count | 470 Count | 230 Count | 4.11 VDC | 0 VDC |
| 1785356026 | 239 Count | 452 Count | 221 Count | 4.11 VDC | 0 VDC |
| 1785354225 | 227 Count | 431 Count | 210 Count | 4.11 VDC | 0 VDC |
| 1785352424 | 215 Count | 409 Count | 199 Count | 4.11 VDC | 0 VDC |
| 1785350624 | 204 Count | 388 Count | 189 Count | 4.11 VDC | 0 VDC |
| 1785348823 | 192 Count | 367 Count | 178 Count | 4.12 VDC | 0 VDC |
| 1785347023 | 182 Count | 347 Count | 169 Count | 4.12 VDC | 0 VDC |
| 1785345222 | 170 Count | 322 Count | 158 Count | 4.12 VDC | 0 VDC |
| 1785343421 | 160 Count | 302 Count | 149 Count | 4.12 VDC | 0 VDC |
| 1785341621 | 149 Count | 282 Count | 139 Count | 4.12 VDC | 0 VDC |
| 1785339820 | 138 Count | 261 Count | 129 Count | 4.12 VDC | 0 VDC |
| 1785338019 | 122 Count | 231 Count | 114 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)