This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765961115 | 0 Count | 142 Count | 0 Count | 0 VDC | 0 VDC |
| 1765960215 | 0 Count | 67 Count | 0 Count | 0 VDC | 0 VDC |
| 1765959315 | 0 Count | 1037 Count | 0 Count | 0 VDC | 0 VDC |
| 1765958415 | 0 Count | 993 Count | 0 Count | 0 VDC | 0 VDC |
| 1765957514 | 0 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1765956615 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1765955714 | 0 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1765954815 | 0 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1765953914 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1765953014 | 0 Count | 642 Count | 0 Count | 0 VDC | 0 VDC |
| 1765952115 | 0 Count | 588 Count | 0 Count | 0 VDC | 0 VDC |
| 1765951214 | 0 Count | 526 Count | 0 Count | 0 VDC | 0 VDC |
| 1765950314 | 0 Count | 484 Count | 0 Count | 0 VDC | 0 VDC |
| 1765949414 | 0 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1765948514 | 0 Count | 426 Count | 0 Count | 0 VDC | 0 VDC |
| 1765947614 | 0 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1765913660 | 0 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1765912759 | 0 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
| 1765911859 | 0 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
| 1765910959 | 0 Count | 319 Count | 0 Count | 0 VDC | 0 VDC |
| 1765910102 | 0 Count | 319 Count | 0 Count | 0 VDC | 0 VDC |
| 1765909201 | 0 Count | 289 Count | 0 Count | 0 VDC | 0 VDC |
| 1765908301 | 0 Count | 236 Count | 0 Count | 0 VDC | 0 VDC |
| 1765907401 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1765906501 | 0 Count | 152 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)