This is the latest recevied telemetry packets stored in our database for station/object 9W4GWK-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1753941776 | 412 | 0 | 0 | 0 | 0 |
1753940873 | 428 | 0 | 0 | 0 | 0 |
1753939973 | 429 | 0 | 0 | 0 | 0 |
1753939073 | 412 | 0 | 0 | 0 | 0 |
1753938173 | 412 | 0 | 0 | 0 | 0 |
1753937273 | 412 | 0 | 0 | 0 | 0 |
1753936373 | 412 | 0 | 0 | 0 | 0 |
1753935473 | 412 | 0 | 0 | 0 | 0 |
1753934573 | 412 | 0 | 0 | 0 | 0 |
1753933673 | 412 | 0 | 0 | 0 | 0 |
1753932777 | 413 | 0 | 0 | 0 | 0 |
1753931873 | 412 | 0 | 0 | 0 | 0 |
1753930971 | 430 | 0 | 0 | 0 | 0 |
1753930071 | 430 | 0 | 0 | 0 | 0 |
1753929171 | 427 | 0 | 0 | 0 | 0 |
1753928272 | 413 | 0 | 0 | 0 | 0 |
1753927371 | 412 | 0 | 0 | 0 | 0 |
1753926471 | 413 | 0 | 0 | 0 | 0 |
1753925571 | 412 | 0 | 0 | 0 | 0 |
1753924671 | 413 | 0 | 0 | 0 | 0 |
1753923772 | 413 | 0 | 0 | 0 | 0 |
1753922872 | 413 | 0 | 0 | 0 | 0 |
1753921972 | 413 | 0 | 0 | 0 | 0 |
1753921071 | 416 | 0 | 0 | 0 | 0 |
1753920171 | 414 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)