This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793644299 | 984 Count | 959 Count | 741 Count | 4.22 VDC | 0 VDC |
| 1793643398 | 978 Count | 953 Count | 736 Count | 4.23 VDC | 0 VDC |
| 1793642497 | 975 Count | 949 Count | 734 Count | 4.21 VDC | 0 VDC |
| 1793641596 | 970 Count | 943 Count | 730 Count | 4.23 VDC | 0 VDC |
| 1793640695 | 962 Count | 936 Count | 723 Count | 4.24 VDC | 0 VDC |
| 1793639794 | 957 Count | 930 Count | 719 Count | 4.24 VDC | 0 VDC |
| 1793638893 | 950 Count | 924 Count | 713 Count | 4.25 VDC | 0 VDC |
| 1793637992 | 946 Count | 920 Count | 710 Count | 4.21 VDC | 0 VDC |
| 1793637092 | 937 Count | 912 Count | 702 Count | 4.24 VDC | 0 VDC |
| 1793636191 | 929 Count | 903 Count | 695 Count | 4.23 VDC | 0 VDC |
| 1793635290 | 922 Count | 897 Count | 689 Count | 4.26 VDC | 0 VDC |
| 1793634389 | 916 Count | 892 Count | 684 Count | 4.26 VDC | 0 VDC |
| 1793633488 | 908 Count | 885 Count | 677 Count | 4.24 VDC | 0 VDC |
| 1793632587 | 900 Count | 878 Count | 670 Count | 4.27 VDC | 0 VDC |
| 1793631686 | 897 Count | 876 Count | 668 Count | 4.24 VDC | 0 VDC |
| 1793630785 | 894 Count | 874 Count | 666 Count | 4.21 VDC | 0 VDC |
| 1793629885 | 891 Count | 872 Count | 664 Count | 4.22 VDC | 0 VDC |
| 1793628984 | 888 Count | 870 Count | 662 Count | 4.24 VDC | 0 VDC |
| 1793628083 | 885 Count | 868 Count | 660 Count | 4.21 VDC | 0 VDC |
| 1793627181 | 868 Count | 852 Count | 644 Count | 4.24 VDC | 0 VDC |
| 1793626280 | 865 Count | 850 Count | 642 Count | 4.24 VDC | 0 VDC |
| 1793625379 | 862 Count | 848 Count | 640 Count | 4.22 VDC | 0 VDC |
| 1793624478 | 859 Count | 846 Count | 638 Count | 4.22 VDC | 0 VDC |
| 1793623577 | 853 Count | 841 Count | 633 Count | 4.23 VDC | 0 VDC |
| 1793622677 | 850 Count | 839 Count | 631 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)