This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762084324 | 16 Count | 338 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762082523 | 12 Count | 268 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762080722 | 7 Count | 186 Count | 0 Count | 4 VDC | 0 VDC |
| 1762078922 | 3 Count | 95 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762077121 | 53 Count | 1060 Count | 0 Count | 4 VDC | 0 VDC |
| 1762075320 | 48 Count | 942 Count | 0 Count | 4 VDC | 0 VDC |
| 1762073520 | 44 Count | 854 Count | 0 Count | 4 VDC | 0 VDC |
| 1762068910 | 28 Count | 557 Count | 0 Count | 4 VDC | 0 VDC |
| 1762067109 | 22 Count | 456 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762065308 | 18 Count | 370 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762063507 | 14 Count | 289 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762061707 | 10 Count | 214 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762059906 | 6 Count | 127 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762059900 | 5 Count | 126 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762059130 | 3 Count | 90 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762057329 | 47 Count | 1036 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762053727 | 39 Count | 868 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762050126 | 31 Count | 688 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762048325 | 27 Count | 605 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762046525 | 23 Count | 512 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762044724 | 19 Count | 435 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762042923 | 15 Count | 349 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762041123 | 11 Count | 261 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762039322 | 7 Count | 179 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1762037521 | 3 Count | 83 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)