This is the latest recevied telemetry packets stored in our database for station/object DC4HF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766038814 | 635 | 5529 | 7420 | 3191 | 4496 |
| 1766037914 | 635 | 5527 | 7415 | 3147 | 4595 |
| 1766037013 | 634 | 5532 | 7414 | 3125 | 4632 |
| 1766036112 | 634 | 5533 | 7419 | 3119 | 4634 |
| 1766035210 | 634 | 5531 | 7419 | 3114 | 4627 |
| 1766034310 | 634 | 5532 | 7415 | 3105 | 4630 |
| 1766033409 | 634 | 5530 | 7410 | 3115 | 4584 |
| 1766032508 | 634 | 5536 | 7421 | 3123 | 4576 |
| 1766031607 | 634 | 5532 | 7416 | 3123 | 4608 |
| 1766030706 | 634 | 5530 | 7414 | 3127 | 4616 |
| 1766029805 | 634 | 5531 | 7412 | 3124 | 4628 |
| 1766028904 | 634 | 5530 | 7414 | 3119 | 4634 |
| 1766028002 | 634 | 5530 | 7414 | 3123 | 4600 |
| 1766027102 | 634 | 5531 | 7416 | 3102 | 4631 |
| 1766026201 | 634 | 5536 | 7417 | 3095 | 4633 |
| 1766025300 | 634 | 5533 | 7419 | 3086 | 4640 |
| 1766024399 | 634 | 5529 | 7409 | 3087 | 4588 |
| 1766023498 | 634 | 5533 | 7416 | 3092 | 4489 |
| 1766022597 | 634 | 5532 | 7412 | 3088 | 4427 |
| 1766021696 | 634 | 5532 | 7413 | 3107 | 4375 |
| 1766020795 | 634 | 5532 | 7412 | 3128 | 4373 |
| 1766019894 | 634 | 5532 | 7416 | 3152 | 4377 |
| 1766018993 | 634 | 5535 | 7417 | 3175 | 4384 |
| 1766018092 | 634 | 5535 | 7421 | 3203 | 4377 |
| 1766017190 | 634 | 5533 | 7420 | 3241 | 4337 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)