This is the latest recevied telemetry packets stored in our database for station/object SQ3DVQ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758023266 | 992 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758022365 | 991 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758021465 | 990 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758020564 | 989 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758019663 | 988 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758018762 | 987 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758017862 | 986 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758016961 | 985 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758016060 | 984 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758015159 | 983 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758014259 | 982 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758013358 | 981 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758012457 | 980 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758011556 | 979 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758010656 | 978 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758009754 | 977 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758008854 | 976 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758007953 | 975 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758007052 | 974 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758006152 | 973 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758005325 | 972 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758004424 | 971 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758003523 | 970 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758002622 | 969 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
| 1758001722 | 968 Count | 715 Count | 241 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)