This is the latest recevied telemetry packets stored in our database for station/object SP5MSV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788982857 | 440 Count | 136 Count | 24 Count | 0 VDC | 0 VDC |
| 1788981056 | 439 Count | 136 Count | 24 Count | 0 VDC | 0 VDC |
| 1788979263 | 438 Count | 136 Count | 24 Count | 0 VDC | 0 VDC |
| 1788977462 | 437 Count | 136 Count | 24 Count | 0 VDC | 0 VDC |
| 1788975662 | 436 Count | 136 Count | 24 Count | 0 VDC | 0 VDC |
| 1788973861 | 422 Count | 123 Count | 11 Count | 0 VDC | 0 VDC |
| 1788972060 | 411 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788970260 | 410 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788968459 | 409 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788966658 | 408 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788964857 | 407 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788963057 | 406 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788961256 | 405 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788959456 | 404 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788957667 | 403 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788955866 | 402 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788954066 | 401 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788952265 | 400 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788950464 | 399 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788948663 | 398 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788946863 | 397 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788945062 | 396 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788943261 | 395 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788941461 | 394 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
| 1788939660 | 393 Count | 113 Count | 1 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)