This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768856102 | 392 | 779 | 413 | 690 | 0 |
| 1768855202 | 392 | 778 | 408 | 688 | 0 |
| 1768854303 | 393 | 773 | 408 | 682 | 0 |
| 1768853402 | 392 | 772 | 408 | 680 | 0 |
| 1768852502 | 392 | 771 | 408 | 679 | 0 |
| 1768851602 | 393 | 770 | 408 | 679 | 0 |
| 1768850702 | 392 | 771 | 408 | 681 | 0 |
| 1768849802 | 393 | 768 | 402 | 680 | 0 |
| 1768848901 | 391 | 766 | 397 | 679 | 0 |
| 1768848002 | 392 | 758 | 397 | 674 | 0 |
| 1768847103 | 393 | 750 | 392 | 666 | 0 |
| 1768846202 | 392 | 742 | 392 | 660 | 0 |
| 1768845301 | 392 | 736 | 386 | 652 | 0 |
| 1768844402 | 393 | 731 | 386 | 646 | 0 |
| 1768843502 | 393 | 726 | 381 | 645 | 0 |
| 1768842602 | 393 | 716 | 376 | 630 | 0 |
| 1768841702 | 393 | 700 | 365 | 630 | 0 |
| 1768840802 | 392 | 684 | 354 | 615 | 0 |
| 1768839902 | 392 | 668 | 349 | 598 | 0 |
| 1768839002 | 393 | 648 | 338 | 579 | 0 |
| 1768838102 | 393 | 637 | 332 | 554 | 0 |
| 1768837202 | 393 | 628 | 322 | 543 | 0 |
| 1768836303 | 393 | 623 | 322 | 536 | 0 |
| 1768835402 | 393 | 623 | 322 | 536 | 0 |
| 1768834502 | 392 | 624 | 322 | 536 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)