This is the latest recevied telemetry packets stored in our database for station/object M9NSZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783259448 | 732 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1783257645 | 731 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1783255842 | 730 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1783254039 | 729 Count | 888 Count | 0 Count | 0 VDC | 0 VDC |
| 1783252236 | 728 Count | 881 Count | 0 Count | 0 VDC | 0 VDC |
| 1783250433 | 727 Count | 876 Count | 0 Count | 0 VDC | 0 VDC |
| 1783248630 | 726 Count | 872 Count | 0 Count | 0 VDC | 0 VDC |
| 1783246827 | 725 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1783245024 | 724 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1783243221 | 723 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1783241454 | 722 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1783239651 | 721 Count | 855 Count | 0 Count | 0 VDC | 0 VDC |
| 1783237848 | 720 Count | 851 Count | 0 Count | 0 VDC | 0 VDC |
| 1783236044 | 719 Count | 849 Count | 0 Count | 0 VDC | 0 VDC |
| 1783234242 | 718 Count | 845 Count | 0 Count | 0 VDC | 0 VDC |
| 1783232438 | 717 Count | 843 Count | 0 Count | 0 VDC | 0 VDC |
| 1783230635 | 716 Count | 842 Count | 0 Count | 0 VDC | 0 VDC |
| 1783228832 | 715 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
| 1783227029 | 714 Count | 832 Count | 0 Count | 0 VDC | 0 VDC |
| 1783225226 | 713 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1783223423 | 712 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1783221620 | 711 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1783219853 | 710 Count | 813 Count | 0 Count | 0 VDC | 0 VDC |
| 1783218050 | 709 Count | 813 Count | 0 Count | 0 VDC | 0 VDC |
| 1783214444 | 707 Count | 810 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)