This is the latest recevied telemetry packets stored in our database for station/object IZ5HQB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750070216 | 4.25 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1750069316 | 4.25 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1750068416 | 4.25 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1750067515 | 4.26 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1750066616 | 4.25 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1750065715 | 4.24 VDC | 12.16 VDC | 0 | 0 | 0 |
| 1750064815 | 4.23 VDC | 12.16 VDC | 0 | 0 | 0 |
| 1750063915 | 4.24 VDC | 12.16 VDC | 0 | 0 | 0 |
| 1750063015 | 4.23 VDC | 12.14 VDC | 0 | 0 | 0 |
| 1750062115 | 4.23 VDC | 12.12 VDC | 0 | 0 | 0 |
| 1750061215 | 4.24 VDC | 12.1 VDC | 0 | 0 | 0 |
| 1750060315 | 4.23 VDC | 12.08 VDC | 0 | 0 | 0 |
| 1750059414 | 4.25 VDC | 12.06 VDC | 0 | 0 | 0 |
| 1750058514 | 4.24 VDC | 12.08 VDC | 0 | 0 | 0 |
| 1750057614 | 4.23 VDC | 12.1 VDC | 0 | 0 | 0 |
| 1750056714 | 4.25 VDC | 12.18 VDC | 0 | 0 | 0 |
| 1750055814 | 4.23 VDC | 12.16 VDC | 0 | 0 | 0 |
| 1750054914 | 4.24 VDC | 12.06 VDC | 0 | 0 | 0 |
| 1750054013 | 4.24 VDC | 11.94 VDC | 0 | 0 | 0 |
| 1750053991 | 4.24 VDC | 12.02 VDC | 0 | 0 | 0 |
| 1750053969 | 4.23 VDC | 12.02 VDC | 0 | 0 | 0 |
| 1750053948 | 4.23 VDC | 12.02 VDC | 0 | 0 | 0 |
| 1750053926 | 4.24 VDC | 12.02 VDC | 0 | 0 | 0 |
| 1750053904 | 4.24 VDC | 11.98 VDC | 0 | 0 | 0 |
| 1750053882 | 4.23 VDC | 12 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)