This is the latest recevied telemetry packets stored in our database for station/object SP6RGZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785402504 | 412 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785400703 | 411 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785398902 | 410 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785397102 | 409 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785395309 | 408 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785393508 | 407 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785391707 | 406 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785389906 | 405 Count | 405 Count | 55 Count | 0 VDC | 0 VDC |
| 1785388106 | 403 Count | 404 Count | 54 Count | 0 VDC | 0 VDC |
| 1785386305 | 394 Count | 396 Count | 46 Count | 0 VDC | 0 VDC |
| 1785384504 | 392 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785382703 | 391 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785380903 | 390 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785379102 | 389 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785377301 | 388 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785375501 | 387 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785352107 | 374 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785350306 | 373 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785348505 | 372 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785346705 | 371 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785344904 | 370 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785343103 | 369 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785330508 | 362 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785328707 | 361 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
| 1785326906 | 360 Count | 395 Count | 45 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)