This is the latest recevied telemetry packets stored in our database for station/object SQ9IKM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789668337 | 18 Count | 63 Count | 12 Count | 0 VDC | 0 VDC |
| 1789667436 | 15 Count | 57 Count | 10 Count | 0 VDC | 0 VDC |
| 1789666536 | 13 Count | 50 Count | 9 Count | 0 VDC | 0 VDC |
| 1789665635 | 11 Count | 45 Count | 8 Count | 0 VDC | 0 VDC |
| 1789664734 | 8 Count | 36 Count | 6 Count | 0 VDC | 0 VDC |
| 1789663834 | 5 Count | 29 Count | 4 Count | 0 VDC | 0 VDC |
| 1789662933 | 2 Count | 17 Count | 2 Count | 0 VDC | 0 VDC |
| 1789662032 | 302 Count | 1002 Count | 231 Count | 0 VDC | 0 VDC |
| 1789661132 | 299 Count | 977 Count | 229 Count | 0 VDC | 0 VDC |
| 1789660231 | 297 Count | 951 Count | 228 Count | 0 VDC | 0 VDC |
| 1789659330 | 294 Count | 934 Count | 226 Count | 0 VDC | 0 VDC |
| 1789636280 | 195 Count | 605 Count | 128 Count | 0 VDC | 0 VDC |
| 1789635379 | 192 Count | 597 Count | 126 Count | 0 VDC | 0 VDC |
| 1789634478 | 189 Count | 571 Count | 124 Count | 0 VDC | 0 VDC |
| 1789633578 | 186 Count | 551 Count | 122 Count | 0 VDC | 0 VDC |
| 1789632677 | 183 Count | 541 Count | 120 Count | 0 VDC | 0 VDC |
| 1789631777 | 181 Count | 534 Count | 119 Count | 0 VDC | 0 VDC |
| 1789630876 | 179 Count | 524 Count | 118 Count | 0 VDC | 0 VDC |
| 1789629075 | 175 Count | 495 Count | 116 Count | 0 VDC | 0 VDC |
| 1789628174 | 166 Count | 479 Count | 108 Count | 0 VDC | 0 VDC |
| 1789627274 | 163 Count | 472 Count | 106 Count | 0 VDC | 0 VDC |
| 1789626373 | 161 Count | 469 Count | 105 Count | 0 VDC | 0 VDC |
| 1789625473 | 159 Count | 464 Count | 104 Count | 0 VDC | 0 VDC |
| 1789624572 | 157 Count | 458 Count | 103 Count | 0 VDC | 0 VDC |
| 1789623671 | 155 Count | 453 Count | 102 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)