This is the latest recevied telemetry packets stored in our database for station/object IK2EXH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754078716 | 0 Pkt/10m | 0 Pkt/10m | 3.12 Volt | 0 | 0 |
| 1754078539 | 139 Pkt/10m | 111 Pkt/10m | 3.14 Volt | 0 | 0 |
| 1754074995 | 0 Pkt/10m | 0 Pkt/10m | 3.19 Volt | 0 | 0 |
| 1754072922 | 0 Pkt/10m | 0 Pkt/10m | 3.43 Volt | 0 | 0 |
| 1754071417 | 104 Pkt/10m | 74 Pkt/10m | 3.27 Volt | 0 | 0 |
| 1754067872 | 99 Pkt/10m | 72 Pkt/10m | 3.31 Volt | 0 | 0 |
| 1754064328 | 0 Pkt/10m | 0 Pkt/10m | 3.31 Volt | 0 | 0 |
| 1754064316 | 0 Pkt/10m | 0 Pkt/10m | 3.35 Volt | 0 | 0 |
| 1754063658 | 145 Pkt/10m | 128 Pkt/10m | 3.35 Volt | 0 | 0 |
| 1754060114 | 95 Pkt/10m | 64 Pkt/10m | 3.35 Volt | 0 | 0 |
| 1754056570 | 131 Pkt/10m | 109 Pkt/10m | 3.45 Volt | 0 | 0 |
| 1754053027 | 125 Pkt/10m | 86 Pkt/10m | 3.61 Volt | 0 | 0 |
| 1754049483 | 99 Pkt/10m | 67 Pkt/10m | 3.55 Volt | 0 | 0 |
| 1754045935 | 109 Pkt/10m | 91 Pkt/10m | 3.43 Volt | 0 | 0 |
| 1754042395 | 84 Pkt/10m | 83 Pkt/10m | 3.47 Volt | 0 | 0 |
| 1754035287 | 91 Pkt/10m | 86 Pkt/10m | 3.23 Volt | 0 | 0 |
| 1754031740 | 125 Pkt/10m | 113 Pkt/10m | 3.19 Volt | 0 | 0 |
| 1754028199 | 99 Pkt/10m | 62 Pkt/10m | 3.21 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)