This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766088601 | 1390 | 92.2 | 48.9 | 81.3 | 0 |
| 1766087702 | 1390 | 93.6 | 49.4 | 82.7 | 0 |
| 1766086801 | 1390 | 94.6 | 49.4 | 84.4 | 0 |
| 1766085902 | 1390 | 95 | 50.5 | 85.2 | 0 |
| 1766085001 | 1391 | 94.9 | 49.4 | 86.2 | 0 |
| 1766084102 | 1392 | 94.4 | 49.4 | 85.8 | 0 |
| 1766083202 | 1391 | 93.5 | 49.4 | 86.1 | 0 |
| 1766082302 | 1390 | 91.7 | 49.4 | 85.4 | 0 |
| 1766081402 | 1391 | 89.6 | 47.2 | 84.4 | 0 |
| 1766080502 | 1391 | 86.9 | 46.7 | 82.4 | 0 |
| 1766079602 | 1391 | 83.6 | 44 | 79.9 | 0 |
| 1766078702 | 1391 | 80.2 | 42.4 | 76.8 | 0 |
| 1766077802 | 1391 | 76.4 | 39.7 | 71.6 | 0 |
| 1766076903 | 1391 | 74.1 | 39.2 | 67.4 | 0 |
| 1766076002 | 1392 | 72.3 | 37.6 | 65.6 | 0 |
| 1766075101 | 1390 | 69.7 | 36.5 | 64.2 | 0 |
| 1766074202 | 1391 | 66.6 | 34.9 | 61.8 | 0 |
| 1766073303 | 1392 | 63.8 | 33.8 | 57.3 | 0 |
| 1766072402 | 1391 | 61.8 | 32.2 | 53.7 | 0 |
| 1766071501 | 1392 | 61.5 | 31.6 | 52.7 | 0 |
| 1766070602 | 1392 | 61.2 | 32.2 | 52.6 | 0 |
| 1766069702 | 1392 | 61 | 32.2 | 52.4 | 0 |
| 1766068801 | 1392 | 60.8 | 31.1 | 51.9 | 0 |
| 1766067902 | 1392 | 60.5 | 31.1 | 51.9 | 0 |
| 1766067001 | 1392 | 60 | 31.1 | 51.5 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)