This is the latest recevied telemetry packets stored in our database for station/object PA3GPU-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773456103 | 181 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1773452500 | 180 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1773448897 | 179 Count | 914 Count | 0 Count | 0 VDC | 0 VDC |
| 1773445295 | 178 Count | 912 Count | 0 Count | 0 VDC | 0 VDC |
| 1773441692 | 177 Count | 910 Count | 0 Count | 0 VDC | 0 VDC |
| 1773434503 | 175 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1773430900 | 174 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1773427297 | 173 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1773423694 | 172 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1773420091 | 171 Count | 896 Count | 0 Count | 0 VDC | 0 VDC |
| 1773416488 | 170 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1773412903 | 169 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1773409301 | 168 Count | 886 Count | 0 Count | 0 VDC | 0 VDC |
| 1773405698 | 167 Count | 884 Count | 0 Count | 0 VDC | 0 VDC |
| 1773402095 | 166 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1773398492 | 165 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1773394889 | 164 Count | 878 Count | 0 Count | 0 VDC | 0 VDC |
| 1773391305 | 163 Count | 876 Count | 0 Count | 0 VDC | 0 VDC |
| 1773387703 | 162 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1773384100 | 161 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1773380497 | 160 Count | 864 Count | 0 Count | 0 VDC | 0 VDC |
| 1773376894 | 159 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1773373291 | 158 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1773369700 | 157 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1773366098 | 156 Count | 851 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)