This is the latest recevied telemetry packets stored in our database for station/object SR2ST-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777368936 | 903 Count | 160 Count | 160 Count | 0 VDC | 0 VDC |
| 1777367255 | 889 Count | 156 Count | 156 Count | 0 VDC | 0 VDC |
| 1777365574 | 875 Count | 152 Count | 152 Count | 0 VDC | 0 VDC |
| 1777363893 | 865 Count | 150 Count | 150 Count | 0 VDC | 0 VDC |
| 1777362213 | 857 Count | 149 Count | 149 Count | 0 VDC | 0 VDC |
| 1777360532 | 847 Count | 147 Count | 147 Count | 0 VDC | 0 VDC |
| 1777359101 | 834 Count | 145 Count | 145 Count | 0 VDC | 0 VDC |
| 1777357420 | 824 Count | 143 Count | 143 Count | 0 VDC | 0 VDC |
| 1777355739 | 813 Count | 141 Count | 141 Count | 0 VDC | 0 VDC |
| 1777354058 | 805 Count | 140 Count | 140 Count | 0 VDC | 0 VDC |
| 1777352377 | 795 Count | 138 Count | 138 Count | 0 VDC | 0 VDC |
| 1777350697 | 784 Count | 136 Count | 136 Count | 0 VDC | 0 VDC |
| 1777349016 | 774 Count | 134 Count | 134 Count | 0 VDC | 0 VDC |
| 1777347335 | 764 Count | 132 Count | 132 Count | 0 VDC | 0 VDC |
| 1777345654 | 754 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1777343973 | 744 Count | 128 Count | 128 Count | 0 VDC | 0 VDC |
| 1777342293 | 733 Count | 126 Count | 126 Count | 0 VDC | 0 VDC |
| 1777340612 | 724 Count | 125 Count | 125 Count | 0 VDC | 0 VDC |
| 1777338931 | 714 Count | 123 Count | 123 Count | 0 VDC | 0 VDC |
| 1777337500 | 701 Count | 121 Count | 121 Count | 0 VDC | 0 VDC |
| 1777335819 | 692 Count | 119 Count | 119 Count | 0 VDC | 0 VDC |
| 1777334138 | 681 Count | 117 Count | 117 Count | 0 VDC | 0 VDC |
| 1777332457 | 673 Count | 116 Count | 116 Count | 0 VDC | 0 VDC |
| 1777330776 | 663 Count | 114 Count | 114 Count | 0 VDC | 0 VDC |
| 1777329096 | 653 Count | 112 Count | 112 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)