This is the latest recevied telemetry packets stored in our database for station/object SR1NRD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768830188 | 274 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768829587 | 273 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768828987 | 272 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768828386 | 271 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768827785 | 270 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768827184 | 269 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768826583 | 268 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768825983 | 267 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768825382 | 266 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768824781 | 265 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768824181 | 264 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768823580 | 263 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768822979 | 262 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768822378 | 261 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768821778 | 260 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768821177 | 259 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768820576 | 258 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768819976 | 257 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768819375 | 256 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768818774 | 255 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768818173 | 254 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768817573 | 253 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768816972 | 252 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768816371 | 251 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768815771 | 250 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)