This is the latest recevied telemetry packets stored in our database for station/object SP5ZBA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763851878 | 490 | 0 | 0 | 0 | 0 |
| 1763850977 | 490 | 0 | 0 | 0 | 0 |
| 1763850077 | 490 | 0 | 0 | 0 | 0 |
| 1763849177 | 464 | 0 | 0 | 0 | 0 |
| 1763848273 | 490 | 0 | 0 | 0 | 0 |
| 1763847372 | 490 | 0 | 0 | 0 | 0 |
| 1763846472 | 490 | 0 | 0 | 0 | 0 |
| 1763845572 | 490 | 0 | 0 | 0 | 0 |
| 1763844674 | 483 | 0 | 0 | 0 | 0 |
| 1763843772 | 483 | 0 | 0 | 0 | 0 |
| 1763842872 | 490 | 0 | 0 | 0 | 0 |
| 1763841972 | 490 | 0 | 0 | 0 | 0 |
| 1763841072 | 490 | 0 | 0 | 0 | 0 |
| 1763840172 | 490 | 0 | 0 | 0 | 0 |
| 1763839272 | 490 | 0 | 0 | 0 | 0 |
| 1763838372 | 488 | 0 | 0 | 0 | 0 |
| 1763837472 | 490 | 0 | 0 | 0 | 0 |
| 1763836572 | 490 | 0 | 0 | 0 | 0 |
| 1763835672 | 490 | 0 | 0 | 0 | 0 |
| 1763834771 | 490 | 0 | 0 | 0 | 0 |
| 1763833871 | 484 | 0 | 0 | 0 | 0 |
| 1763832971 | 490 | 0 | 0 | 0 | 0 |
| 1763832071 | 490 | 0 | 0 | 0 | 0 |
| 1763831171 | 490 | 0 | 0 | 0 | 0 |
| 1763830271 | 490 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)