This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792887107 | 677 Count | 782 Count | 514 Count | 0 VDC | 0 VDC |
| 1792886206 | 674 Count | 775 Count | 512 Count | 0 VDC | 0 VDC |
| 1792885304 | 671 Count | 772 Count | 510 Count | 0 VDC | 0 VDC |
| 1792884403 | 668 Count | 766 Count | 508 Count | 0 VDC | 0 VDC |
| 1792883502 | 665 Count | 762 Count | 506 Count | 0 VDC | 0 VDC |
| 1792882601 | 662 Count | 756 Count | 504 Count | 0 VDC | 0 VDC |
| 1792881699 | 659 Count | 751 Count | 502 Count | 0 VDC | 0 VDC |
| 1792880798 | 657 Count | 749 Count | 501 Count | 0 VDC | 0 VDC |
| 1792879927 | 654 Count | 747 Count | 499 Count | 0 VDC | 0 VDC |
| 1792879026 | 651 Count | 742 Count | 497 Count | 0 VDC | 0 VDC |
| 1792878124 | 648 Count | 738 Count | 495 Count | 0 VDC | 0 VDC |
| 1792877223 | 645 Count | 732 Count | 493 Count | 0 VDC | 0 VDC |
| 1792876322 | 642 Count | 729 Count | 491 Count | 0 VDC | 0 VDC |
| 1792875420 | 639 Count | 724 Count | 489 Count | 0 VDC | 0 VDC |
| 1792874519 | 636 Count | 721 Count | 487 Count | 0 VDC | 0 VDC |
| 1792873618 | 633 Count | 716 Count | 485 Count | 0 VDC | 0 VDC |
| 1792872717 | 630 Count | 713 Count | 483 Count | 0 VDC | 0 VDC |
| 1792871815 | 627 Count | 708 Count | 481 Count | 0 VDC | 0 VDC |
| 1792870914 | 624 Count | 705 Count | 479 Count | 0 VDC | 0 VDC |
| 1792870013 | 621 Count | 702 Count | 477 Count | 0 VDC | 0 VDC |
| 1792869112 | 618 Count | 700 Count | 475 Count | 0 VDC | 0 VDC |
| 1792868210 | 616 Count | 696 Count | 474 Count | 0 VDC | 0 VDC |
| 1792867309 | 613 Count | 693 Count | 472 Count | 0 VDC | 0 VDC |
| 1792866408 | 610 Count | 687 Count | 470 Count | 0 VDC | 0 VDC |
| 1792865506 | 607 Count | 684 Count | 468 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)