This is the latest recevied telemetry packets stored in our database for station/object SQ7AYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785388390 | 251 Count | 814 Count | 246 Count | 0 VDC | 0 VDC |
| 1785386588 | 218 Count | 662 Count | 214 Count | 0 VDC | 0 VDC |
| 1785384787 | 170 Count | 492 Count | 167 Count | 0 VDC | 0 VDC |
| 1785382987 | 118 Count | 369 Count | 116 Count | 0 VDC | 0 VDC |
| 1785381186 | 75 Count | 252 Count | 74 Count | 0 VDC | 0 VDC |
| 1785379385 | 38 Count | 130 Count | 38 Count | 0 VDC | 0 VDC |
| 1785377594 | 476 Count | 1117 Count | 410 Count | 0 VDC | 0 VDC |
| 1785375794 | 436 Count | 983 Count | 371 Count | 0 VDC | 0 VDC |
| 1785373993 | 401 Count | 873 Count | 337 Count | 0 VDC | 0 VDC |
| 1785372192 | 373 Count | 749 Count | 310 Count | 0 VDC | 0 VDC |
| 1785370392 | 341 Count | 631 Count | 279 Count | 0 VDC | 0 VDC |
| 1785368589 | 311 Count | 526 Count | 250 Count | 0 VDC | 0 VDC |
| 1785366789 | 291 Count | 434 Count | 231 Count | 0 VDC | 0 VDC |
| 1785364988 | 281 Count | 403 Count | 222 Count | 0 VDC | 0 VDC |
| 1785363188 | 277 Count | 399 Count | 219 Count | 0 VDC | 0 VDC |
| 1785361387 | 274 Count | 397 Count | 217 Count | 0 VDC | 0 VDC |
| 1785359587 | 272 Count | 396 Count | 216 Count | 0 VDC | 0 VDC |
| 1785357786 | 268 Count | 393 Count | 213 Count | 0 VDC | 0 VDC |
| 1785355991 | 265 Count | 391 Count | 211 Count | 0 VDC | 0 VDC |
| 1785354190 | 262 Count | 389 Count | 209 Count | 0 VDC | 0 VDC |
| 1785352390 | 259 Count | 387 Count | 207 Count | 0 VDC | 0 VDC |
| 1785350589 | 256 Count | 385 Count | 205 Count | 0 VDC | 0 VDC |
| 1785348788 | 253 Count | 383 Count | 203 Count | 0 VDC | 0 VDC |
| 1785346988 | 250 Count | 381 Count | 201 Count | 0 VDC | 0 VDC |
| 1785345187 | 240 Count | 372 Count | 192 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)