This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766428141 | 8 | 172 | 1012 | 1152 | 0 |
| 1766425115 | 7 | 173 | 1012 | 1149 | 0 |
| 1766422096 | 9 | 169 | 1012 | 1149 | 0 |
| 1766419073 | 9 | 170 | 1013 | 1152 | 0 |
| 1766416053 | 8 | 164 | 1014 | 1149 | 0 |
| 1766413031 | 11 | 150 | 1013 | 1149 | 0 |
| 1766410002 | 10 | 163 | 1013 | 1149 | 0 |
| 1766406972 | 8 | 160 | 1013 | 1146 | 0 |
| 1766403948 | 8 | 159 | 1014 | 1149 | 0 |
| 1766400888 | 10 | 158 | 1015 | 1146 | 0 |
| 1766397834 | 10 | 155 | 1014 | 1149 | 0 |
| 1766394775 | 8 | 155 | 1015 | 1149 | 0 |
| 1766391721 | 7 | 160 | 1015 | 1149 | 0 |
| 1766388691 | 7 | 173 | 1014 | 1146 | 0 |
| 1766385587 | 9 | 182 | 1015 | 1146 | 0 |
| 1766382516 | 9 | 201 | 1015 | 1146 | 0 |
| 1766379433 | 7 | 236 | 1015 | 1146 | 0 |
| 1766376380 | 8 | 195 | 1016 | 1146 | 0 |
| 1766373307 | 7 | 199 | 1017 | 1146 | 0 |
| 1766370206 | 7 | 167 | 1018 | 1149 | 0 |
| 1766367099 | 9 | 136 | 1018 | 1146 | 0 |
| 1766364035 | 9 | 126 | 1018 | 1146 | 0 |
| 1766357820 | 8 | 124 | 1018 | 1146 | 0 |
| 1766354729 | 8 | 116 | 1018 | 1149 | 0 |
| 1766351696 | 8 | 109 | 1018 | 1146 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)