This is the latest recevied telemetry packets stored in our database for station/object HB9EZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773466858 | 305 Count | 709 Count | 111 Count | 0 VDC | 0 VDC |
| 1773465955 | 303 Count | 707 Count | 110 Count | 0 VDC | 0 VDC |
| 1773465052 | 302 Count | 705 Count | 110 Count | 0 VDC | 0 VDC |
| 1773464149 | 300 Count | 703 Count | 109 Count | 0 VDC | 0 VDC |
| 1773463246 | 299 Count | 702 Count | 109 Count | 0 VDC | 0 VDC |
| 1773462343 | 297 Count | 698 Count | 108 Count | 0 VDC | 0 VDC |
| 1773461440 | 296 Count | 696 Count | 108 Count | 0 VDC | 0 VDC |
| 1773460537 | 295 Count | 694 Count | 108 Count | 0 VDC | 0 VDC |
| 1773459634 | 293 Count | 691 Count | 107 Count | 0 VDC | 0 VDC |
| 1773458731 | 291 Count | 687 Count | 106 Count | 0 VDC | 0 VDC |
| 1773457827 | 289 Count | 684 Count | 105 Count | 0 VDC | 0 VDC |
| 1773456924 | 288 Count | 682 Count | 105 Count | 0 VDC | 0 VDC |
| 1773456021 | 287 Count | 680 Count | 105 Count | 0 VDC | 0 VDC |
| 1773455118 | 284 Count | 676 Count | 103 Count | 0 VDC | 0 VDC |
| 1773454215 | 283 Count | 675 Count | 103 Count | 0 VDC | 0 VDC |
| 1773453312 | 281 Count | 672 Count | 102 Count | 0 VDC | 0 VDC |
| 1773452482 | 280 Count | 670 Count | 102 Count | 0 VDC | 0 VDC |
| 1773451579 | 279 Count | 667 Count | 102 Count | 0 VDC | 0 VDC |
| 1773450676 | 277 Count | 664 Count | 101 Count | 0 VDC | 0 VDC |
| 1773449773 | 276 Count | 662 Count | 101 Count | 0 VDC | 0 VDC |
| 1773448870 | 274 Count | 659 Count | 100 Count | 0 VDC | 0 VDC |
| 1773447967 | 272 Count | 656 Count | 99 Count | 0 VDC | 0 VDC |
| 1773447064 | 270 Count | 654 Count | 98 Count | 0 VDC | 0 VDC |
| 1773446161 | 269 Count | 651 Count | 98 Count | 0 VDC | 0 VDC |
| 1773445258 | 268 Count | 650 Count | 98 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)