This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777377800 | 426 Count | 217 Count | 210 Count | 0 VDC | 0 VDC |
| 1777376000 | 424 Count | 216 Count | 209 Count | 0 VDC | 0 VDC |
| 1777374199 | 422 Count | 215 Count | 208 Count | 0 VDC | 0 VDC |
| 1777372398 | 420 Count | 214 Count | 207 Count | 0 VDC | 0 VDC |
| 1777370598 | 418 Count | 213 Count | 206 Count | 0 VDC | 0 VDC |
| 1777368797 | 416 Count | 212 Count | 205 Count | 0 VDC | 0 VDC |
| 1777366997 | 414 Count | 211 Count | 204 Count | 0 VDC | 0 VDC |
| 1777365203 | 409 Count | 211 Count | 204 Count | 0 VDC | 0 VDC |
| 1777363402 | 407 Count | 210 Count | 203 Count | 0 VDC | 0 VDC |
| 1777361602 | 406 Count | 210 Count | 203 Count | 0 VDC | 0 VDC |
| 1777359801 | 404 Count | 209 Count | 202 Count | 0 VDC | 0 VDC |
| 1777358001 | 403 Count | 209 Count | 202 Count | 0 VDC | 0 VDC |
| 1777356200 | 399 Count | 206 Count | 199 Count | 0 VDC | 0 VDC |
| 1777354400 | 398 Count | 206 Count | 199 Count | 0 VDC | 0 VDC |
| 1777352598 | 396 Count | 205 Count | 198 Count | 0 VDC | 0 VDC |
| 1777350798 | 394 Count | 204 Count | 197 Count | 0 VDC | 0 VDC |
| 1777348997 | 392 Count | 203 Count | 196 Count | 0 VDC | 0 VDC |
| 1777347196 | 390 Count | 202 Count | 195 Count | 0 VDC | 0 VDC |
| 1777345396 | 388 Count | 201 Count | 194 Count | 0 VDC | 0 VDC |
| 1777343602 | 383 Count | 201 Count | 194 Count | 0 VDC | 0 VDC |
| 1777341802 | 382 Count | 201 Count | 194 Count | 0 VDC | 0 VDC |
| 1777340001 | 380 Count | 200 Count | 193 Count | 0 VDC | 0 VDC |
| 1777338201 | 379 Count | 200 Count | 193 Count | 0 VDC | 0 VDC |
| 1777336399 | 378 Count | 200 Count | 193 Count | 0 VDC | 0 VDC |
| 1777334599 | 377 Count | 200 Count | 193 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)