This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781415680 | 693 Count | 566 Count | 503 Count | 4.21 VDC | 0 VDC |
| 1781414779 | 691 Count | 565 Count | 502 Count | 4.18 VDC | 0 VDC |
| 1781413878 | 689 Count | 564 Count | 501 Count | 4.19 VDC | 0 VDC |
| 1781412977 | 687 Count | 563 Count | 500 Count | 4.18 VDC | 0 VDC |
| 1781412076 | 685 Count | 562 Count | 499 Count | 4.2 VDC | 0 VDC |
| 1781411175 | 683 Count | 561 Count | 498 Count | 4.2 VDC | 0 VDC |
| 1781410275 | 681 Count | 560 Count | 497 Count | 4.21 VDC | 0 VDC |
| 1781409374 | 679 Count | 559 Count | 496 Count | 4.19 VDC | 0 VDC |
| 1781408473 | 677 Count | 558 Count | 495 Count | 4.17 VDC | 0 VDC |
| 1781407572 | 675 Count | 557 Count | 494 Count | 4.19 VDC | 0 VDC |
| 1781406671 | 673 Count | 556 Count | 493 Count | 4.2 VDC | 0 VDC |
| 1781405770 | 671 Count | 555 Count | 492 Count | 4.21 VDC | 0 VDC |
| 1781404869 | 669 Count | 554 Count | 491 Count | 4.17 VDC | 0 VDC |
| 1781403969 | 667 Count | 553 Count | 490 Count | 4.19 VDC | 0 VDC |
| 1781403068 | 665 Count | 552 Count | 489 Count | 4.19 VDC | 0 VDC |
| 1781402167 | 663 Count | 551 Count | 488 Count | 4.21 VDC | 0 VDC |
| 1781401266 | 661 Count | 550 Count | 487 Count | 4.17 VDC | 0 VDC |
| 1781400365 | 659 Count | 549 Count | 486 Count | 4.19 VDC | 0 VDC |
| 1781399464 | 657 Count | 548 Count | 485 Count | 4.19 VDC | 0 VDC |
| 1781398564 | 655 Count | 547 Count | 484 Count | 4.22 VDC | 0 VDC |
| 1781397663 | 653 Count | 546 Count | 483 Count | 4.2 VDC | 0 VDC |
| 1781396762 | 651 Count | 545 Count | 482 Count | 4.18 VDC | 0 VDC |
| 1781395861 | 649 Count | 544 Count | 481 Count | 4.17 VDC | 0 VDC |
| 1781394960 | 647 Count | 543 Count | 480 Count | 4.17 VDC | 0 VDC |
| 1781394059 | 645 Count | 542 Count | 479 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)