This is the latest recevied telemetry packets stored in our database for station/object EA1AHA-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770052140 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1770051240 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1770050340 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1770048540 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1770047640 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1770046741 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1770045840 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1770044941 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1770044040 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1770043140 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1770042240 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1770041341 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1770040440 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1770039540 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1770038640 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1770037740 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1770036840 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1770035939 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1770035040 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1770034140 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1770033240 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1770031440 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1770029640 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1770028740 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1770027840 | 3.81 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)