This is the latest recevied telemetry packets stored in our database for station/object SP6PTT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778674824 | 34 Count | 196 Count | 32 Count | 0 VDC | 0 VDC |
| 1778673023 | 18 Count | 116 Count | 17 Count | 0 VDC | 0 VDC |
| 1778671222 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778669430 | 145 Count | 956 Count | 137 Count | 0 VDC | 0 VDC |
| 1778667629 | 129 Count | 842 Count | 122 Count | 0 VDC | 0 VDC |
| 1778665829 | 113 Count | 742 Count | 107 Count | 0 VDC | 0 VDC |
| 1778664028 | 101 Count | 651 Count | 96 Count | 0 VDC | 0 VDC |
| 1778662227 | 86 Count | 569 Count | 82 Count | 0 VDC | 0 VDC |
| 1778660426 | 69 Count | 475 Count | 66 Count | 0 VDC | 0 VDC |
| 1778658626 | 52 Count | 350 Count | 50 Count | 0 VDC | 0 VDC |
| 1778656825 | 34 Count | 231 Count | 33 Count | 0 VDC | 0 VDC |
| 1778655024 | 18 Count | 135 Count | 18 Count | 0 VDC | 0 VDC |
| 1778653224 | 182 Count | 1048 Count | 173 Count | 0 VDC | 0 VDC |
| 1778651423 | 162 Count | 878 Count | 154 Count | 0 VDC | 0 VDC |
| 1778649622 | 148 Count | 783 Count | 141 Count | 0 VDC | 0 VDC |
| 1778647828 | 127 Count | 648 Count | 121 Count | 0 VDC | 0 VDC |
| 1778646028 | 101 Count | 541 Count | 96 Count | 0 VDC | 0 VDC |
| 1778644227 | 83 Count | 449 Count | 79 Count | 0 VDC | 0 VDC |
| 1778642426 | 66 Count | 359 Count | 63 Count | 0 VDC | 0 VDC |
| 1778640625 | 49 Count | 273 Count | 47 Count | 0 VDC | 0 VDC |
| 1778638825 | 32 Count | 181 Count | 31 Count | 0 VDC | 0 VDC |
| 1778637024 | 15 Count | 93 Count | 15 Count | 0 VDC | 0 VDC |
| 1778635223 | 204 Count | 1057 Count | 195 Count | 0 VDC | 0 VDC |
| 1778633422 | 183 Count | 953 Count | 175 Count | 0 VDC | 0 VDC |
| 1778631622 | 167 Count | 866 Count | 160 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)