This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1757157368 | 36.06 °C | 32.7 %RH | 828 hPa | 4.29 V | 15 |
| 1757155988 | 34.36 °C | 33 %RH | 828 hPa | 3.7 V | 18 |
| 1757155375 | 34.47 °C | 32.7 %RH | 828 hPa | 3.71 V | 18 |
| 1757155366 | 34.49 °C | 32.6 %RH | 828 hPa | 3.71 V | 18 |
| 1757155357 | 34.49 °C | 32.6 %RH | 828 hPa | 3.43 V | 18 |
| 1757155348 | 34.5 °C | 32.6 %RH | 828 hPa | 3.43 V | 18 |
| 1757154749 | 34.84 °C | 32.1 %RH | 828 hPa | 3.75 V | 17 |
| 1757154216 | 35.38 °C | 31.4 %RH | 828 hPa | 3.77 V | 19 |
| 1757153599 | 36.15 °C | 30.6 %RH | 828 hPa | 3.51 V | 18 |
| 1757153585 | 36.18 °C | 30.6 %RH | 828 hPa | 3.78 V | 17 |
| 1757152913 | 36.52 °C | 33 %RH | 828 hPa | 3.79 V | 15 |
| 1757152902 | 36.49 °C | 33.1 %RH | 828 hPa | 3.79 V | 15 |
| 1757152878 | 36.52 °C | 32.8 %RH | 828 hPa | 3.84 V | 14 |
| 1757152869 | 36.56 °C | 33 %RH | 828 hPa | 3.84 V | 14 |
| 1757152860 | 36.63 °C | 32.2 %RH | 828 hPa | 3.81 V | 13 |
| 1757152851 | 36.63 °C | 32.9 %RH | 828 hPa | 3.81 V | 13 |
| 1757152843 | 36.63 °C | 32.9 %RH | 828 hPa | 3.81 V | 13 |
| 1757152834 | 36.61 °C | 32.4 %RH | 828 hPa | 3.81 V | 13 |
| 1757152770 | 36.75 °C | 30.1 %RH | 828 hPa | 3.8 V | 22 |
| 1757152761 | 36.75 °C | 29.7 %RH | 828 hPa | 3.8 V | 22 |
| 1757152752 | 36.75 °C | 29.7 %RH | 828 hPa | 3.8 V | 22 |
| 1757152735 | 36.77 °C | 31.9 %RH | 828 hPa | 3.8 V | 23 |
| 1757152726 | 36.79 °C | 32.2 %RH | 828 hPa | 3.8 V | 23 |
| 1757152696 | 36.81 °C | 31.8 %RH | 828 hPa | 3.81 V | 18 |
| 1757152687 | 36.84 °C | 32.7 %RH | 828 hPa | 3.81 V | 18 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 0
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)