This is the latest recevied telemetry packets stored in our database for station/object SQ4VW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785118442 | 292 Count | 778 Count | 110 Count | 0 VDC | 0 VDC |
| 1785118141 | 288 Count | 749 Count | 107 Count | 0 VDC | 0 VDC |
| 1785117841 | 286 Count | 731 Count | 107 Count | 0 VDC | 0 VDC |
| 1785117540 | 282 Count | 701 Count | 104 Count | 0 VDC | 0 VDC |
| 1785117239 | 278 Count | 682 Count | 102 Count | 0 VDC | 0 VDC |
| 1785116939 | 276 Count | 669 Count | 101 Count | 0 VDC | 0 VDC |
| 1785116637 | 272 Count | 654 Count | 99 Count | 0 VDC | 0 VDC |
| 1785116336 | 269 Count | 639 Count | 97 Count | 0 VDC | 0 VDC |
| 1785116035 | 267 Count | 632 Count | 97 Count | 0 VDC | 0 VDC |
| 1785115735 | 264 Count | 616 Count | 95 Count | 0 VDC | 0 VDC |
| 1785115434 | 259 Count | 606 Count | 92 Count | 0 VDC | 0 VDC |
| 1785115134 | 257 Count | 599 Count | 91 Count | 0 VDC | 0 VDC |
| 1785114832 | 253 Count | 589 Count | 89 Count | 0 VDC | 0 VDC |
| 1785114531 | 250 Count | 580 Count | 87 Count | 0 VDC | 0 VDC |
| 1785114230 | 248 Count | 573 Count | 87 Count | 0 VDC | 0 VDC |
| 1785113930 | 246 Count | 562 Count | 86 Count | 0 VDC | 0 VDC |
| 1785113628 | 242 Count | 553 Count | 84 Count | 0 VDC | 0 VDC |
| 1785113328 | 240 Count | 546 Count | 83 Count | 0 VDC | 0 VDC |
| 1785113027 | 237 Count | 539 Count | 82 Count | 0 VDC | 0 VDC |
| 1785112726 | 235 Count | 531 Count | 81 Count | 0 VDC | 0 VDC |
| 1785112426 | 233 Count | 530 Count | 81 Count | 0 VDC | 0 VDC |
| 1785112125 | 231 Count | 520 Count | 80 Count | 0 VDC | 0 VDC |
| 1785111824 | 228 Count | 510 Count | 79 Count | 0 VDC | 0 VDC |
| 1785111523 | 227 Count | 500 Count | 79 Count | 0 VDC | 0 VDC |
| 1785111223 | 224 Count | 487 Count | 78 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)