This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762201819 | 12.5 VDC | 0 | 0 | 0 | 0 |
| 1762200919 | 12.52 VDC | 0 | 0 | 0 | 0 |
| 1762200019 | 12.34 VDC | 0 | 0 | 0 | 0 |
| 1762199119 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1762198219 | 12.52 VDC | 0 | 0 | 0 | 0 |
| 1762197311 | 12.52 VDC | 0 | 0 | 0 | 0 |
| 1762196403 | 12.56 VDC | 0 | 0 | 0 | 0 |
| 1762195497 | 12.66 VDC | 0 | 0 | 0 | 0 |
| 1762194763 | 12.7 VDC | 0 | 0 | 0 | 0 |
| 1762193856 | 12.72 VDC | 0 | 0 | 0 | 0 |
| 1762192949 | 12.74 VDC | 0 | 0 | 0 | 0 |
| 1762192040 | 12.8 VDC | 0 | 0 | 0 | 0 |
| 1762191133 | 12.82 VDC | 0 | 0 | 0 | 0 |
| 1762190226 | 12.84 VDC | 0 | 0 | 0 | 0 |
| 1762189319 | 12.82 VDC | 0 | 0 | 0 | 0 |
| 1762188412 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1762187505 | 13.16 VDC | 0 | 0 | 0 | 0 |
| 1762186597 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1762185689 | 13.32 VDC | 0 | 0 | 0 | 0 |
| 1762184782 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1762183875 | 13.26 VDC | 0 | 0 | 0 | 0 |
| 1762182968 | 13.32 VDC | 0 | 0 | 0 | 0 |
| 1762182061 | 12.98 VDC | 0 | 0 | 0 | 0 |
| 1762181153 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1762180246 | 13.56 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)