This is the latest recevied telemetry packets stored in our database for station/object EA4IHO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 05/25/2025 10:29:03 AM+00:00 | 4.49 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:23:32 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:21:31 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:21:01 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:20:29 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:17:56 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:17:33 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:16:47 AM+00:00 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:07:07 AM+00:00 | 4.51 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:01:22 AM+00:00 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 10:00:36 AM+00:00 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 9:59:26 AM+00:00 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 9:59:03 AM+00:00 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 9:54:44 AM+00:00 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 9:39:41 AM+00:00 | 5.2 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 9:24:38 AM+00:00 | 5.2 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 9:09:35 AM+00:00 | 5.19 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 8:54:32 AM+00:00 | 5.19 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 8:39:29 AM+00:00 | 5.17 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 8:24:26 AM+00:00 | 5.18 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 8:09:23 AM+00:00 | 5.16 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 7:54:20 AM+00:00 | 5.12 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 7:39:17 AM+00:00 | 5.13 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 7:24:14 AM+00:00 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 05/25/2025 7:09:11 AM+00:00 | 4.23 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)