This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785375283 | 499 Count | 251 Count | 19 Count | 0 VDC | 0 VDC |
| 1785373900 | 495 Count | 249 Count | 19 Count | 0 VDC | 0 VDC |
| 1785372218 | 494 Count | 248 Count | 19 Count | 0 VDC | 0 VDC |
| 1785370537 | 493 Count | 247 Count | 19 Count | 0 VDC | 0 VDC |
| 1785368856 | 492 Count | 246 Count | 19 Count | 0 VDC | 0 VDC |
| 1785367167 | 491 Count | 245 Count | 19 Count | 0 VDC | 0 VDC |
| 1785365475 | 490 Count | 244 Count | 19 Count | 0 VDC | 0 VDC |
| 1785363781 | 489 Count | 242 Count | 19 Count | 0 VDC | 0 VDC |
| 1785362100 | 488 Count | 241 Count | 19 Count | 0 VDC | 0 VDC |
| 1785360419 | 487 Count | 240 Count | 19 Count | 0 VDC | 0 VDC |
| 1785358738 | 486 Count | 239 Count | 19 Count | 0 VDC | 0 VDC |
| 1785357043 | 485 Count | 238 Count | 19 Count | 0 VDC | 0 VDC |
| 1785355362 | 484 Count | 232 Count | 19 Count | 0 VDC | 0 VDC |
| 1785353682 | 482 Count | 231 Count | 19 Count | 0 VDC | 0 VDC |
| 1785352250 | 478 Count | 230 Count | 19 Count | 0 VDC | 0 VDC |
| 1785350569 | 477 Count | 229 Count | 19 Count | 0 VDC | 0 VDC |
| 1785348889 | 476 Count | 228 Count | 19 Count | 0 VDC | 0 VDC |
| 1785347208 | 475 Count | 227 Count | 19 Count | 0 VDC | 0 VDC |
| 1785345527 | 474 Count | 226 Count | 19 Count | 0 VDC | 0 VDC |
| 1785343846 | 473 Count | 225 Count | 19 Count | 0 VDC | 0 VDC |
| 1785342166 | 472 Count | 224 Count | 19 Count | 0 VDC | 0 VDC |
| 1785340485 | 471 Count | 223 Count | 19 Count | 0 VDC | 0 VDC |
| 1785338804 | 470 Count | 222 Count | 19 Count | 0 VDC | 0 VDC |
| 1785337123 | 469 Count | 221 Count | 19 Count | 0 VDC | 0 VDC |
| 1785335443 | 468 Count | 220 Count | 19 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)