This is the latest recevied telemetry packets stored in our database for station/object XE2AD-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793634000 | 891 Count | 1001 Count | 667 Count | 0 VDC | 0 VDC |
| 1793632197 | 880 Count | 988 Count | 657 Count | 0 VDC | 0 VDC |
| 1793630393 | 876 Count | 982 Count | 654 Count | 0 VDC | 0 VDC |
| 1793628590 | 870 Count | 975 Count | 649 Count | 0 VDC | 0 VDC |
| 1793626787 | 865 Count | 969 Count | 645 Count | 0 VDC | 0 VDC |
| 1793624168 | 857 Count | 963 Count | 643 Count | 0 VDC | 0 VDC |
| 1793622364 | 852 Count | 956 Count | 639 Count | 0 VDC | 0 VDC |
| 1793618796 | 838 Count | 946 Count | 631 Count | 0 VDC | 0 VDC |
| 1793616992 | 834 Count | 942 Count | 628 Count | 0 VDC | 0 VDC |
| 1793615189 | 831 Count | 939 Count | 626 Count | 0 VDC | 0 VDC |
| 1793613385 | 824 Count | 933 Count | 620 Count | 0 VDC | 0 VDC |
| 1793611583 | 822 Count | 931 Count | 619 Count | 0 VDC | 0 VDC |
| 1793609779 | 816 Count | 925 Count | 614 Count | 0 VDC | 0 VDC |
| 1793607976 | 812 Count | 920 Count | 611 Count | 0 VDC | 0 VDC |
| 1793606172 | 807 Count | 915 Count | 607 Count | 0 VDC | 0 VDC |
| 1793604369 | 802 Count | 907 Count | 603 Count | 0 VDC | 0 VDC |
| 1793602566 | 796 Count | 898 Count | 598 Count | 0 VDC | 0 VDC |
| 1793600762 | 793 Count | 895 Count | 596 Count | 0 VDC | 0 VDC |
| 1793597193 | 779 Count | 880 Count | 588 Count | 0 VDC | 0 VDC |
| 1793595389 | 775 Count | 875 Count | 585 Count | 0 VDC | 0 VDC |
| 1793593586 | 773 Count | 872 Count | 584 Count | 0 VDC | 0 VDC |
| 1793591783 | 768 Count | 862 Count | 580 Count | 0 VDC | 0 VDC |
| 1793589979 | 764 Count | 854 Count | 577 Count | 0 VDC | 0 VDC |
| 1793588176 | 759 Count | 846 Count | 573 Count | 0 VDC | 0 VDC |
| 1793586372 | 748 Count | 833 Count | 563 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)