This is the latest recevied telemetry packets stored in our database for station/object ED1YBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768213753 | 4.25 VDC | 11.22 VDC | 0 | 0 | 0 |
| 1768212552 | 4.25 VDC | 11.14 VDC | 0 | 0 | 0 |
| 1768211352 | 4.24 VDC | 11.08 VDC | 0 | 0 | 0 |
| 1768210151 | 4.24 VDC | 10.94 VDC | 0 | 0 | 0 |
| 1768208950 | 4.17 VDC | 5.32 VDC | 0 | 0 | 0 |
| 1768207750 | 4.12 VDC | 5.3 VDC | 0 | 0 | 0 |
| 1768206549 | 4.04 VDC | 5.16 VDC | 0 | 0 | 0 |
| 1768205348 | 4.04 VDC | 4.42 VDC | 0 | 0 | 0 |
| 1768204148 | 4.04 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1768202947 | 4.04 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768201746 | 4.05 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768200546 | 4.05 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768199345 | 4.06 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768198144 | 4.06 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768196944 | 4.07 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768195743 | 4.07 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768194542 | 4.08 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768193341 | 4.08 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768192141 | 4.09 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768190940 | 4.1 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768189739 | 4.1 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768188539 | 4.1 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768187338 | 4.11 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768186137 | 4.12 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1768184937 | 4.12 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)