This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777391134 | 396 Count | 593 Count | 396 Count | 0 VDC | 0 VDC |
| 1777389334 | 394 Count | 591 Count | 394 Count | 0 VDC | 0 VDC |
| 1777387537 | 394 Count | 591 Count | 394 Count | 0 VDC | 0 VDC |
| 1777385737 | 389 Count | 586 Count | 389 Count | 0 VDC | 0 VDC |
| 1777383936 | 386 Count | 580 Count | 386 Count | 0 VDC | 0 VDC |
| 1777382136 | 385 Count | 579 Count | 385 Count | 0 VDC | 0 VDC |
| 1777380336 | 384 Count | 577 Count | 384 Count | 0 VDC | 0 VDC |
| 1777378536 | 380 Count | 563 Count | 380 Count | 0 VDC | 0 VDC |
| 1777376735 | 379 Count | 562 Count | 379 Count | 0 VDC | 0 VDC |
| 1777374935 | 379 Count | 562 Count | 379 Count | 0 VDC | 0 VDC |
| 1777373135 | 378 Count | 561 Count | 378 Count | 0 VDC | 0 VDC |
| 1777371335 | 377 Count | 560 Count | 377 Count | 0 VDC | 0 VDC |
| 1777367734 | 377 Count | 560 Count | 377 Count | 0 VDC | 0 VDC |
| 1777365935 | 376 Count | 559 Count | 376 Count | 0 VDC | 0 VDC |
| 1777364135 | 374 Count | 557 Count | 374 Count | 0 VDC | 0 VDC |
| 1777362335 | 372 Count | 555 Count | 372 Count | 0 VDC | 0 VDC |
| 1777360535 | 371 Count | 554 Count | 371 Count | 0 VDC | 0 VDC |
| 1777358734 | 361 Count | 544 Count | 361 Count | 0 VDC | 0 VDC |
| 1777356934 | 355 Count | 538 Count | 355 Count | 0 VDC | 0 VDC |
| 1777355134 | 351 Count | 534 Count | 351 Count | 0 VDC | 0 VDC |
| 1777353334 | 347 Count | 530 Count | 347 Count | 0 VDC | 0 VDC |
| 1777351534 | 346 Count | 529 Count | 346 Count | 0 VDC | 0 VDC |
| 1777349734 | 344 Count | 527 Count | 344 Count | 0 VDC | 0 VDC |
| 1777347933 | 339 Count | 515 Count | 339 Count | 0 VDC | 0 VDC |
| 1777346133 | 331 Count | 492 Count | 331 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)