This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785153063 | 432 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785151262 | 431 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785149462 | 430 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785147661 | 429 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785145860 | 428 Count | 608 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1785144068 | 427 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785142267 | 426 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785140466 | 425 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785138666 | 424 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785136865 | 423 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785135064 | 422 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785133263 | 421 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785131462 | 420 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785129661 | 419 Count | 608 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785127860 | 418 Count | 602 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785126060 | 417 Count | 600 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785124259 | 416 Count | 598 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785122593 | 415 Count | 596 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785120792 | 414 Count | 594 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785118991 | 413 Count | 592 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785117190 | 412 Count | 590 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785115389 | 411 Count | 588 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785113589 | 410 Count | 586 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1785111788 | 409 Count | 584 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1785109987 | 408 Count | 582 Count | 0 Count | 4.17 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)