This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770054129 | 354 Count | 334 Count | 333 Count | 4.31 VDC | 0 VDC |
| 1770053166 | 339 Count | 319 Count | 319 Count | 4.31 VDC | 0 VDC |
| 1770052201 | 309 Count | 290 Count | 290 Count | 4.31 VDC | 0 VDC |
| 1770051238 | 294 Count | 276 Count | 276 Count | 4.31 VDC | 0 VDC |
| 1770050275 | 271 Count | 254 Count | 254 Count | 4.31 VDC | 0 VDC |
| 1770049312 | 251 Count | 235 Count | 235 Count | 4.31 VDC | 0 VDC |
| 1770048349 | 228 Count | 213 Count | 213 Count | 4.31 VDC | 0 VDC |
| 1770047386 | 210 Count | 196 Count | 196 Count | 4.31 VDC | 0 VDC |
| 1770046423 | 192 Count | 179 Count | 179 Count | 4.31 VDC | 0 VDC |
| 1770044493 | 143 Count | 132 Count | 132 Count | 4.31 VDC | 0 VDC |
| 1770043529 | 122 Count | 112 Count | 112 Count | 4.31 VDC | 0 VDC |
| 1770042567 | 107 Count | 98 Count | 98 Count | 4.3 VDC | 0 VDC |
| 1770042158 | 96 Count | 92 Count | 92 Count | 4.31 VDC | 0 VDC |
| 1770040232 | 40 Count | 38 Count | 38 Count | 4.31 VDC | 0 VDC |
| 1770038305 | 19 Count | 19 Count | 19 Count | 4.31 VDC | 0 VDC |
| 1770036379 | 961 Count | 896 Count | 893 Count | 4.31 VDC | 0 VDC |
| 1770032526 | 886 Count | 825 Count | 822 Count | 4.31 VDC | 0 VDC |
| 1770030600 | 857 Count | 798 Count | 795 Count | 4.31 VDC | 0 VDC |
| 1770026743 | 774 Count | 719 Count | 716 Count | 4.31 VDC | 0 VDC |
| 1770024817 | 736 Count | 683 Count | 680 Count | 4.31 VDC | 0 VDC |
| 1770022890 | 690 Count | 639 Count | 636 Count | 4.31 VDC | 0 VDC |
| 1770020964 | 655 Count | 606 Count | 603 Count | 4.3 VDC | 0 VDC |
| 1770019240 | 626 Count | 583 Count | 580 Count | 4.3 VDC | 0 VDC |
| 1770016705 | 578 Count | 541 Count | 538 Count | 4.3 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)