This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793623038 | 601 Count | 316 Count | 90 Count | 3.9 VDC | 0.08 VDC |
| 1793622134 | 589 Count | 305 Count | 88 Count | 3.91 VDC | 0.08 VDC |
| 1793621230 | 573 Count | 298 Count | 86 Count | 3.91 VDC | 0.08 VDC |
| 1793620326 | 558 Count | 288 Count | 84 Count | 3.9 VDC | 0.08 VDC |
| 1793619423 | 539 Count | 282 Count | 82 Count | 3.91 VDC | 0.08 VDC |
| 1793618518 | 520 Count | 273 Count | 78 Count | 3.91 VDC | 0.08 VDC |
| 1793617614 | 502 Count | 266 Count | 76 Count | 3.91 VDC | 0.08 VDC |
| 1793616709 | 489 Count | 256 Count | 74 Count | 3.91 VDC | 0.08 VDC |
| 1793615805 | 477 Count | 245 Count | 73 Count | 3.91 VDC | 0.08 VDC |
| 1793614901 | 466 Count | 235 Count | 71 Count | 3.91 VDC | 0.08 VDC |
| 1793613997 | 451 Count | 230 Count | 69 Count | 3.9 VDC | 0.08 VDC |
| 1793613209 | 436 Count | 226 Count | 67 Count | 3.91 VDC | 0.08 VDC |
| 1793612305 | 415 Count | 222 Count | 65 Count | 3.91 VDC | 0.08 VDC |
| 1793611401 | 396 Count | 217 Count | 62 Count | 3.91 VDC | 0.08 VDC |
| 1793610497 | 378 Count | 207 Count | 60 Count | 3.91 VDC | 0.08 VDC |
| 1793609592 | 361 Count | 201 Count | 58 Count | 3.91 VDC | 0.08 VDC |
| 1793608688 | 348 Count | 190 Count | 56 Count | 3.91 VDC | 0.08 VDC |
| 1793607783 | 329 Count | 182 Count | 54 Count | 3.92 VDC | 0.08 VDC |
| 1793606879 | 306 Count | 176 Count | 51 Count | 3.92 VDC | 0.08 VDC |
| 1793605975 | 285 Count | 171 Count | 49 Count | 3.92 VDC | 0.08 VDC |
| 1793605071 | 264 Count | 167 Count | 48 Count | 3.92 VDC | 0.08 VDC |
| 1793604167 | 243 Count | 159 Count | 45 Count | 3.92 VDC | 0.08 VDC |
| 1793603263 | 221 Count | 152 Count | 43 Count | 3.92 VDC | 0.08 VDC |
| 1793602359 | 202 Count | 146 Count | 41 Count | 3.92 VDC | 0.08 VDC |
| 1793601455 | 179 Count | 136 Count | 37 Count | 3.92 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)