This is the latest recevied telemetry packets stored in our database for station/object IT9IRS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788981666 | 177 Count | 429 Count | 144 Count | 0 VDC | 0 VDC |
| 1788981061 | 174 Count | 413 Count | 142 Count | 0 VDC | 0 VDC |
| 1788980457 | 169 Count | 397 Count | 138 Count | 0 VDC | 0 VDC |
| 1788979852 | 165 Count | 380 Count | 135 Count | 0 VDC | 0 VDC |
| 1788979247 | 157 Count | 368 Count | 128 Count | 0 VDC | 0 VDC |
| 1788978642 | 151 Count | 356 Count | 123 Count | 0 VDC | 0 VDC |
| 1788978038 | 145 Count | 338 Count | 118 Count | 0 VDC | 0 VDC |
| 1788976829 | 132 Count | 311 Count | 107 Count | 0 VDC | 0 VDC |
| 1788976224 | 127 Count | 298 Count | 103 Count | 0 VDC | 0 VDC |
| 1788975619 | 121 Count | 290 Count | 98 Count | 0 VDC | 0 VDC |
| 1788975014 | 118 Count | 284 Count | 96 Count | 0 VDC | 0 VDC |
| 1788974409 | 113 Count | 267 Count | 92 Count | 0 VDC | 0 VDC |
| 1788973805 | 108 Count | 251 Count | 88 Count | 0 VDC | 0 VDC |
| 1788973200 | 103 Count | 241 Count | 84 Count | 0 VDC | 0 VDC |
| 1788972595 | 95 Count | 224 Count | 77 Count | 0 VDC | 0 VDC |
| 1788971991 | 89 Count | 213 Count | 72 Count | 0 VDC | 0 VDC |
| 1788971386 | 83 Count | 200 Count | 67 Count | 0 VDC | 0 VDC |
| 1788971134 | 74 Count | 192 Count | 63 Count | 0 VDC | 0 VDC |
| 1788970529 | 68 Count | 178 Count | 58 Count | 0 VDC | 0 VDC |
| 1788969925 | 62 Count | 166 Count | 53 Count | 0 VDC | 0 VDC |
| 1788969320 | 58 Count | 154 Count | 50 Count | 0 VDC | 0 VDC |
| 1788968715 | 53 Count | 142 Count | 46 Count | 0 VDC | 0 VDC |
| 1788968111 | 45 Count | 125 Count | 39 Count | 0 VDC | 0 VDC |
| 1788967506 | 39 Count | 107 Count | 34 Count | 0 VDC | 0 VDC |
| 1788966901 | 32 Count | 92 Count | 28 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)