This is the latest recevied telemetry packets stored in our database for station/object SP8AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778670643 | 223 Count | 755 Count | 198 Count | 4.16 VDC | 0.14 VDC |
| 1778669875 | 213 Count | 731 Count | 193 Count | 4.18 VDC | 0.14 VDC |
| 1778668968 | 205 Count | 705 Count | 186 Count | 4.14 VDC | 0.14 VDC |
| 1778667158 | 179 Count | 635 Count | 162 Count | 4.15 VDC | 0.14 VDC |
| 1778666248 | 167 Count | 592 Count | 151 Count | 4.14 VDC | 0.14 VDC |
| 1778665340 | 153 Count | 549 Count | 138 Count | 4.03 VDC | 0.14 VDC |
| 1778663526 | 127 Count | 474 Count | 114 Count | 4.01 VDC | 0.14 VDC |
| 1778662618 | 119 Count | 440 Count | 107 Count | 4.03 VDC | 0.14 VDC |
| 1778661714 | 111 Count | 402 Count | 100 Count | 3.9 VDC | 0.14 VDC |
| 1778655366 | 36 Count | 172 Count | 32 Count | 3.76 VDC | 0.14 VDC |
| 1778652652 | 11 Count | 62 Count | 10 Count | 3.68 VDC | 0.14 VDC |
| 1778651747 | 5 Count | 29 Count | 5 Count | 3.67 VDC | 0.14 VDC |
| 1778650841 | 295 Count | 1014 Count | 259 Count | 3.67 VDC | 0.14 VDC |
| 1778649936 | 289 Count | 983 Count | 254 Count | 3.63 VDC | 0.14 VDC |
| 1778649031 | 279 Count | 952 Count | 245 Count | 3.65 VDC | 0.14 VDC |
| 1778639802 | 274 Count | 950 Count | 245 Count | 3.56 VDC | 0.14 VDC |
| 1778638896 | 264 Count | 913 Count | 236 Count | 3.56 VDC | 0.14 VDC |
| 1778637081 | 243 Count | 843 Count | 217 Count | 3.57 VDC | 0.14 VDC |
| 1778635267 | 224 Count | 778 Count | 200 Count | 3.58 VDC | 0.14 VDC |
| 1778634363 | 215 Count | 746 Count | 192 Count | 3.59 VDC | 0.14 VDC |
| 1778633458 | 205 Count | 710 Count | 183 Count | 3.6 VDC | 0.14 VDC |
| 1778632732 | 193 Count | 680 Count | 176 Count | 3.6 VDC | 0.14 VDC |
| 1778630915 | 168 Count | 615 Count | 153 Count | 3.61 VDC | 0.14 VDC |
| 1778630004 | 156 Count | 583 Count | 142 Count | 3.61 VDC | 0.14 VDC |
| 1778629094 | 144 Count | 548 Count | 131 Count | 3.65 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)